One of the hardest and most annoying type of stains that one would ever come across would be none other than the bleach stains. These types of stains are very ugly to look at and when they are there, they will not be able to come off. Fortunately, there is a alternative way to fix bleach stain on carpet.
Now the very first step is to moisten the carpet a little bit. It should be a little bit damp because if a lot of dirt is present, it might get in the way of the fixing job. So for this, one does not need to really clean the whole thing but just make sure it is a little damp.
After one has already done this, then the very next thing that one should do would be to cut out a few fibers from the other parts of the carpet. If one would not want to spoil it, then another thing that he may do would be to cut on fibers from other carpets if he does have others in his house. He just has to make sure that the colors would actually match.
After he has already collected a significant amount of fibers, then the next step is to get a small index card or a small piece of cardboard. From there, take the collection of fibers and stick it to the small cardboard or index card. One can either use some tape to do this or use some really sticky glue.
When one has already finished with that, then the next step is to run down to the paint store and buy some paint. The best type of paint to use for this job is acrylic paint because it is really easy to use and it does not come off easily. One just has to make sure that the color is the same.
When one has got the paints, then the next thing that one should is to simply crop out the affected area. Now one thing to remember is that it is quite difficult to take out the entire thing. So in order to do this step, one has to cut out the fibers in the affected area with some scissors until there is something like that of an exposed spot in the area.
With the empty spot in the area, one may now place the index card with the fibers. Now do take note that this little index card may actually fall off and not stick. So in order to make sure that it does stick, the best thing that one may do would be to use some epoxy to stick it there.
Of course the final step to this entire process would be to cover the entire thing with the acrylic paint. Now the purpose of doing this is to make sure that all the spots are finally covered and that there is no traces of the index card or cardboard anywhere. So once that is already done, just wait.
Now the very first step is to moisten the carpet a little bit. It should be a little bit damp because if a lot of dirt is present, it might get in the way of the fixing job. So for this, one does not need to really clean the whole thing but just make sure it is a little damp.
After one has already done this, then the very next thing that one should do would be to cut out a few fibers from the other parts of the carpet. If one would not want to spoil it, then another thing that he may do would be to cut on fibers from other carpets if he does have others in his house. He just has to make sure that the colors would actually match.
After he has already collected a significant amount of fibers, then the next step is to get a small index card or a small piece of cardboard. From there, take the collection of fibers and stick it to the small cardboard or index card. One can either use some tape to do this or use some really sticky glue.
When one has already finished with that, then the next step is to run down to the paint store and buy some paint. The best type of paint to use for this job is acrylic paint because it is really easy to use and it does not come off easily. One just has to make sure that the color is the same.
When one has got the paints, then the next thing that one should is to simply crop out the affected area. Now one thing to remember is that it is quite difficult to take out the entire thing. So in order to do this step, one has to cut out the fibers in the affected area with some scissors until there is something like that of an exposed spot in the area.
With the empty spot in the area, one may now place the index card with the fibers. Now do take note that this little index card may actually fall off and not stick. So in order to make sure that it does stick, the best thing that one may do would be to use some epoxy to stick it there.
Of course the final step to this entire process would be to cover the entire thing with the acrylic paint. Now the purpose of doing this is to make sure that all the spots are finally covered and that there is no traces of the index card or cardboard anywhere. So once that is already done, just wait.
0 comments:
Post a Comment