Friday, November 13, 2015

A Comprehensive Guide On Concrete Cleaning Annapolis

By Mattie Knight


The concrete has many functions for both residential and commercial buildings. It functions as driveway, people walk on it, and sometimes holds parties at the site. A spotless-clean concrete speaks volume about the people around. For commercial buildings, it keeps customers visiting places while for residential places friends and relatives will be regular visitors. There are simple methods that can be used to ensure the site appear elegant. The concrete cleaning Annapolis services leave the driveway or the site glittering.

It is recommendable to note that the concrete attracts dirt often, hence within a few days it may appear very dirty. The first step is to plan and prepare for the cleaning. Ensure the site is free of furniture, frames, cars, and decorations. Cover the face with a dust mask and grab a strong broom. Swiftly sweep the sites, cover the important plants with tarps. Sweeping ensures nails and glass pieces are removed. There is need to ensure all electrical equipment and cords do not get into contact with water.

Developing a homemade cleaner is a simple task that can be achieved by diligently following the necessary procedure. Mix hot water and correct amount of oxygen bleach according to the packaging instruction in a six -gallon bucket. Then add water until the bucket is full. A simple stick can be used to stir the mixture. The city Annapolis MD is home for quality Oxygen bleaches.

The mixture should then be poured to a sprayer tank. Spray every place on the site ensuring the corners, which are mostly ignored are flooded with the bleach. Ensure the site is flooded with the bleach. Give the bleach around thirty minutes to dry.

The scrubbing action requires a stable and long broom. Leather gloves are preferable for this step to avoid bleach contact and friction. The corners have debris, glass pieces, and a plant part hence concentrating on these areas is recommendable. The garage mostly contains the oil and grease stain, which can be removed by rigorous scrubbing. Attention should be given to the whole site to eliminate patches that may arise once the bleach is washed off.

Tools and machines are designed to make work smooth. Possessing a pressure washer is an added advantage. However, borrowing from family members or friends can be helpful. The ability of the pressure washer to throw water to a large distance at a high speed is amazing. The washer nozzle is supposed to tilt to the fan rather than the stream. The nozzle should be held two feet above concrete. To ensure even cleaning, the entire site must be flooded with water. The city Annapolis MD provides such services.

There is need to use environmental friendly method to achieve untarnished cleaning. Incidences such as automotive spill deserve the attention of solid waste unit. However, fresh spills of grease or oils will require to be covered by a kitty litter overnight. The permanent stains can also be eliminated by scrubbing using the homemade concrete cleaner.

To make sure the site dries without leaving patches, use a push mop to remove the water. If the cleaning process was aimed at application of concrete sealant, wait for five days to give the site time for drying. The market has many environmentally friendly sealants, conduct research through the Internet or seek referrals from an environmental expert. Such products and experts can be traced in the city Annapolis MD.




About the Author:



0 comments:

Post a Comment