Saturday, December 27, 2014

Most Effective Clay Soil Stabilization Method

By Claudine Hodges


The challenge with constructing on clays soil is lies in the fact that the soil attracts and holds a lot of water which causes swelling. The swelling and shrinking effect during dry and wet seasons exposes buildings to damage. Clay soil stabilization is recommended to prepare such a ground before construction. It makes the surface ideal for large commercial and residential structures as well as roads, parking lots and pad sites.

The conventional way of dealing with this soil has been introduction of select fill at the foundation. This is an expensive, artificial and time consuming approach. The fill requires preparation and transportation to the site. The resulting ground is not necessarily the best for some projects.

Mechanical methods like the use of piers have also been applied. This approach is expensive and will increase your construction cost. Regular injection of water is another approach. This is a delicate measure that would better be replaced by a lasting solution. It has been termed as delaying damage on the structure. The building will suffer structural damage as the dry and wet seasons alternate.

The use of Condor SS has scientific backing for use before construction or during repair. The earth sheds off water instead of absorbing it. It prevents the regular shrinking and swelling that is witnessed during dry and wet seasons. The construction surface therefore becomes consistently firm and ready to support any structure.

Condor SS is derived from crude oil because of its stabilizing properties. When applied on foundations, it causes water to naturally drain through evaporation, compaction and gravity. The resulting surface is a consistent texture that is ready for construction. The alternation of wet and dry seasons will not cause swelling and shrinking of the ground.

Application of condor SS should be done before the damage has occurred. This way, it will prevent cracks from forming on the structure. Where damage has already occurred, it should be applied before performing repairs. This will prevent the recurrence of damage or extension into other areas.

Condor SS controls damage effectively when applied on the foundation. It is used independently or alongside other mechanical intervention measures. It supports mechanical interventions so that they are not overwhelmed. The structure remains strong during both wet and dry seasons.

No special equipment are required during application of this stabilizer. Water pumps can be used since they perform excellently. This is better than transporting select fill-in material and using it as the foundation. It is cost effective and does not change the natural balance of the underlying surface.

A ground that is stabilized before construction offers more benefits than when it is a remedial measure. All the areas are evenly covered. This is the recommended construction approach. You will require the assistance of Las Vegas NV stabilization experts to determine the right strength. They need to measure the intensity of clay in the area.

Condor SS is an environmentally friendly product that is approved by industry regulators. Less energy, materials and equipment are used to produce a very durable surface. The resulting surface can support expansive commercial, residential and industrial structures as well as roads, runways and parking lots.




About the Author:



0 comments:

Post a Comment